Skip to main content

Ethernet-Bee

The Ethernet-Bee is a connector to connect the senseBox to the internet via cable. The LAN-Bee is based on the W5500 microchip from Wiznet, which enables a high data transfer rate.

Ethernet Bee

Technical Information​

  • "Plug-in-and-Go" senseBox compatible
  • 3.3V operating voltage with 5V I/O signal tolerance
  • Dimensions: 46mm x 25mm x 12mm
  • Weight: 9.2 g

Programming (Arduino)​

#include <SPI.h>
#include <Ethernet.h>
#include <senseBoxIO.h>

void setup()
{
    // Initializes the serial monitor
    Serial.begin(9600);
    // Restarts W5500 (LAN-Bee) in XBEE1 socket
    senseBoxIO.powerXB1(false);
    delay(250);
    senseBoxIO.powerXB1(true);
    Ethernet.init(PIN_XB1_CS);
}

void loop()
{
    // Outputs the IP address of the senseBox
    ip = Ethernet.localIP();
    Serial.print("IP: ");
    Serial.println(ip);
    delay(5000);
}

Notes and Tips​

The LAN-Bee is delivered without a LAN cable. For permanent outdoor installation, flat LAN cables are particularly suitable, as they can be easily laid through windows and doors to the outside. Especially in combination with Power over Ethernet (PoE), the senseBox can then be easily operated.